- E-mail: aven@hiboo-tool.com
中文版 | 
English
中文版 | English
Home >Products>Solid Carbide End Mills>Carbide Corner Raduis End Mills >HRC55 Carbide Corner Raduis End Mills
To Share:
Carbide Corner Raduis End Mills- Long Shank
1.HRC55 quality , Ultra Fine Grain size: 0.5um,Wc:89%,Co:11%, High qulaity of wearability and impact.
2.Super TiSiN coating reduce the coeffiction of friction, and improve the tools life much.
3. Work Piece: Carbon steel, alloy steel, cast steel, tooling steel, mould steel, heat-treament steel. Aluminum alloy steel, Non ferrous alloy.
4.Standard Specification : Diameter 1mm-20mm
5. Accept order of special tools
6. Specification:
3×8×3D×R0.3×75L×4F | 3 | 8 | 3 | R0.3 | 75 |
3×8×3D×R0.5×75L×4F | 3 | 8 | 3 | R0.5 | 75 |
3×8×4D×R0.5×75L×4F | 3 | 8 | 4 | R0.5 | 75 |
3×8×4D×R1.0×75L×4F | 3 | 8 | 4 | R1.0 | 75 |
4×10×4D×R0.5×75L×4F | 4 | 10 | 4 | R0.5 | 75 |
4×10×4D×R1.0×75L×4F | 4 | 10 | 4 | R1.0 | 75 |
4×10×6D×R0.5×75L×4F | 4 | 10 | 6 | R0.5 | 75 |
4×10×6D×R1.0×75L×4F | 4 | 10 | 6 | R1.0 | 75 |
5×13×6D×R0.5×75L×4F | 5 | 13 | 6 | R0.5 | 75 |
5×13×6D×R1.0×75L×4F | 5 | 13 | 6 | R1.0 | 75 |
6×15×6D×R0.5×75L×4F | 6 | 15 | 6 | R0.5 | 75 |
6×15×6D×R1.0×75L×4F | 6 | 15 | 6 | R1.0 | 75 |
8×20×8D×R0.5×100L×4F | 8 | 20 | 8 | R0.5 | 100 |
8×20×8D×R1.0×100L×4F | 8 | 20 | 8 | R1.0 | 100 |
8×20×8D×R1.5×100L×4F | 8 | 20 | 8 | R1.5 | 100 |
10×25×10D×R0.5×100L×4F | 10 | 25 | 10 | R0.5 | 100 |
10×25×10D×R1.0×100L×4F | 10 | 25 | 10 | R1.0 | 100 |
10×25×10D×R1.5×100L×4F | 10 | 25 | 10 | R1.5 | 100 |
10×25×10D×R2.0×100L×4F | 10 | 25 | 10 | R2.0 | 100 |
12×30×12D×R0.5×100L×4F | 12 | 30 | 12 | R0.5 | 100 |
12×30×12D×R1.0×100L×4F | 12 | 30 | 12 | R1.0 | 100 |
12×30×12D×R1.5×100L×4F | 12 | 30 | 12 | R1.5 | 100 |
12×30×12D×R2.0×100L×4F | 12 | 30 | 12 | R2.0 | 100 |
_6880.jpg)
